虽然很多人看衰Mastercam，可是它依旧是诸多CAM软件中的引领者。小编这儿为各位产生Mastercam X10中文版，仅64位，极致破译安装，适用win7.win8.1及其win10系统软件。必须的朋友们可以下载试一下哦！

使用方法

小编这儿给予的是网盘地址，百度云盘很有可能会速度限制，能够在本网站搜百度云不限速版。

1) 双击鼠标 setup.exe 运作安装程序流程，随后在安装页面挑选“安装MASTERCAM X10”...

2) 安装全过程中当弹出 Hasp 和 NetHasp 的选择项时，请务必挑选 Hasp ；下一栏最好是挑选 Metric (即是公制单位)

3) 安装进行后先不必运作程序流程,请先在光碟内的Crack文件夹名称里双击鼠标 m-mc10.exe 开展解密, 解密的路径设成跟您刚刚安装MASTERCAM X10 的路径同样, 假如解密失败,系统软件会弹出警示: Cannot openXXX:\XXX\...\mastercam.exe file,Please make sure that location youve specified is corret. 这时您务必再次恰当设定路径再再次.

4) 解密进行后然后安装 MastrcamX10简体中文版汉化包.exe

5) 建议把 MastrcamX10简体中文版汉化包.exe 和 MastrcamX10中文转英文.exe 拷贝到安装文件目录下,便于于随时随地英中转换!

6) 如今您能够运行汉化版的MASTERCAM.X10了!

7) 留意：假如您在运行MASTERCAM.X时提醒 “No SIM found” 或 “沒有SIM发觉” 而无法进入系统，那麼请您开启安装文件目录下的“NHaspX.exe”（例如：C:\Mcamx\NHaspX.exe），在弹出的对话框里的 SIM type: 项后边选定 HASP 随后按 OK 撤出就可以！

PS：实际上X10并沒有出，如今最多的版本号是9.1。

软件特色

Mastercams Dynamic Motion toolpaths deliver these powerful benefits while helping you get the most out of any machine - new or old. Mastercam has included Dynamic Motion technology for more than five years and we are constantly expanding it across the core of the Mastercam suite. That means the speed and efficiencies are built into our software, with no extra cost to you.

Reduce Cycle Time

Dynamic Motions material-aware technique can reduce cycle times by 25% to 75%.

Extend Tool Life

Dramatically extended tool life means fewer tool changes, more parts, and less expense.

Reduce Machine Wear

Smooth motion and fewer toolpath reversals mean that your machines take less wear and tear.

Dynamic Milling

Aggressive cuts, consistent chip load, and superior heat management supercharge your milling.

Dynamic Turning

Minimized air cutting and consistent tool wear boost cycle efficiency and cutter life.